Ozone Generators for Permanent Cigarette Odor Removal Without Fragrances or Residues.
Cigarette smoke is not only irritating to those with allergies and asthma, but the smoke fumes and vapors spread into almost every part of a facility. They cling to the carpet, upholstery, drapes, clothing and other soft materials. Microscopic smoke residue will remain on the walls, the ceiling, inside closets, cabinets, cracks and crevices, and most other surfaces. Managers of properties such as Hotels, Apartments, Rental Houses, Smoking Bars, Casinos, Bingo Parlors, and even
Auto Detailers all benefit from the OdorFree ozone generator for cigarette smoke odor removal from their facilities.
Cigarette smoke can be a difficult pollutant to remove because there are different components to the smoke. The first component of smoking is that cigarettes produce many toxic and irritating gases such as carbon monoxide, phenol, and ammonia gases. The second component of the smoke odor is the high level of tar vapors released into the air as cigarettes are smoked. These smelly tar vapors become sticky when they contact surfaces. They travel everywhere in the facility that smoke or air can flow into, including inside air vents, on walls and ceilings, on furniture, and even inside closets and cabinets. To totally eliminate cigarette smoke odor, you need something that will follow the same path as the tobacco vapors and oxidize the odors away. The OdorFree ozone generator is a cigarette odor eliminator.
The OdorFree is extremely effective on smoke because the ozone (O3) attacks odors at their source. As the O3 is circulated throughout the room or facility, it oxidizes the fumes and the residue adhering to various surfaces. The ozone will go wherever air will flow and follow the same path that cigarette smoke took when contacting those surfaces, and even flows into vents, cracks and crevices to permanently remove cigarette odor.
+How to Treat Cigarette Odors+
Solution: To eliminate cigarette smoke odors, close off the area to be treated and place an OdorFree unit in the area and set the timer. Then vacate the area and run the ozone generator for several hours or longer depending on the severity of the odors. (If tobacco has only been used for a few days in the space, for example, it may take less than an hour. If tobacco has been used for years, it may take two or three days.) Allow the O3 to dissipate for at least an hour prior to re-occupying space. If the smoke odor has not been completely eliminated, repeat the ozone treatment again.
Note: The fan on the thermostat for the air conditioner may be turned to the ON setting to circulate the O3 and remove cigarette odor that has built up inside the ductwork and the air conditioner unit itself. For long term treatment it is recommended that one window be kept open about 2 inches to provide a constant source of oxygen for ozone creation.
- Autel 1000Autos and Hotel Rooms
- Suite 1500Up to 1500 sq ft
- Villa 3000Up to 3000 sq ft
- Estate 4000Up to 4000 sq ft
For Autos, Hotels, and Small Spaces
with Short Treatment Times
Built-in 1 to 60-Minute Timer|Continuous Hold Setting
Up to 1,000 Square Feet|Adjustable Ozone Output
The Autel 1000 is able to eliminate cigarette and smoke odors in spaces up to 1,000 square feet, however, this unit only has a 60-Minute Timer. Most spaces require longer treatment times, so an OdorFree model with a 12-Hour Timer is more convenient. This model has a variable ozone output control and a 60-Minute Timer that automatically turns the machine off when the treatment is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 60 minutes until the machine is turned off manually. Complete with plates and filter for long-term use.
Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, odors can migrate through the ductwork and the entire facility may need to be treated at one time.
Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 1,500 Square Feet|Adjustable Ozone Output
The Suite 1500 will eliminate cigarette and smoke odors in spaces up to 1,500 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the treatment is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Suite 1500 can also be used for rapid odor removal in smaller spaces. Complete with plates and filter for long-term use.
Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, odors can migrate through the ductwork and the entire facility may need to be treated at one time.
Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 3,000 Square Feet|Adjustable Ozone Output
The Villa 3000 will eliminate cigarette and smoke odors in spaces up to 3,000 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the treatment is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Villa 3000 can also be used for rapid odor removal in smaller spaces. Complete with plates and filter for long-term use.
Note: An OdorFree model designed for larger spaces will always reduce the treatment time, especially for stronger odors. Also, odors can migrate through the ductwork and the entire facility may need to be treated at one time.
Built-in 1 to 12-Hour Timer|Continuous Hold Setting
Up to 4,000 Square Feet|Adjustable Ozone Output
The Estate 4000 will eliminate cigarette and smoke odors in spaces up to 4,000 square feet. This model has a variable ozone output control and a 1 to 12-Hour Timer that automatically turns the machine off when the treatment is completed. For deeply entrenched odors, there is also a “Hold” setting for treatment longer than 12 hours until the machine is turned off manually. The Estate 4000 is for the largest spaces and toughest odors but can also be used for rapid odor removal in smaller spaces. Complete with easy to clean plates and filter for long-term use. This model can be used to treat spaces larger than 4,000 sq ft with longer treatment times.
Note: Odors can migrate through the ductwork and the entire facility may need to be treated at one time.
